Can You Refinish a Cast Concrete Kitchen Counter?
Concrete kitchen counter – The use of concrete countertop materials have raised sharply in recent years. It is a very durable material that can withstand wear and tear of a kitchen well. When properly treated and cared for, should concrete last for decades with little trouble. In the event that the granite chip or crack with age, or otherwise require a style upgrade, there are a number of repair techniques to choose from. Apply a coat of paint is a fairly simple, inexpensive way to change the look of a concrete kitchen counter. It is important to fill the cracks before starting the painting process. Hairline cracks are relatively common in concrete and must be overlapped by a crack filler and epoxy putty. Smooth the filler into the cracks and allow plenty of time to dry; specific drying times vary according to manufacturer. Clean counter with soap and water to remove grease and surface stains; Use a wire brush to rough up the surface of the bench. The painting process requires 01:59 layers of primer, multiple thin layers of latex paint, and two layers of polyurethane. Each coat should be given ample time to dry before another layer is applied.
Overlay concrete kitchen counter, a concrete overlay will give a new surface for countertops. The process involves the addition of a thin layer of concrete over the existing countertop using a trowel. This will cover any minor problems, such as cracks, chips or existing color. The coating material can be colored with paint or stain to match the decor. When the layer dries completely, it must be coated with polyurethane to prevent stains, scratches and other problems. This is an important step in renovating an existing countertop.
Embossing, concrete stamping is a process that will add texture to the countertop to beautiful and elegant concrete kitchen counter. This is done when the concrete is poured, or as a supplement for an overlay. Before the concrete dries, it is pressed with stamps to create the desired look. These stamps can create the look of brick, granite, wood or stone, among other materials – usually at a much lower cost. Pigments are added to achieve the specific look desired.